Our designs use either Araldite or Polyurethane as an insulator.

We require information regarding the usual parameters, these include the primary voltage and the working potential of the Secondary windings, this is applicable for transformers which are developing nominal secondary voltages but the secondary winding is also sitting at a high potential say 20kV_DC.

As long as the information includes the superimposed HV on each secondary and screens we can then design the transformer.

If you have any specific maximum dimensions please advise us on the initial enquiry.

The AC developing transformer size is governed by the voltage of the secondary. With AC developing, care has to be taken with the winding insulation which includes interlayer insulation where as on the DC isolation transformers only the potential between the high voltage and the earthy windings are important.